Atec Tektronix-RSA3303A-308A Uživatelský manuál Strana 6

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 8
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 5
RF/Wireless Test Products
www.tektronix.com/rsa
6
Real-time Spectrum Analyzers
RSA2200A Series
RSA3300A Series
Real-Time Capture Bandwidth
(seamless data capture) –
RSA2203A and RSA2208A: 10 MHz (rf); 20 MHz,
DC – 20 MHz (Baseband (Opt.05)).
RSA3303A and RSA3308A: 15 MHz (rf); 20 MHz,
DC – 20 MHz (Baseband); 20 MHz,
IQ Inputs (Opt.03).
Data Samples per Frame (Real-time S/A
Mode) – 1024.
Block Size (number of frames) –
RSA2203A and RSA2208A: 1 to 500.
RSA3303A and RSA3308A: 1 to 16000;
1 to 64000 (Opt. 02).
Maximum A/D Sampling Rate and Resolution –
51.2 Msamples/sec, 14 bits.
Measurement Speed
Screen Update Rate –
38/Sec, (SA Mode, 2 MHz span, 128 point FFT).
35/Sec, (SA Mode, 2 MHz span, 1024 point FFT).
Remote Measurement Rate and GPIB Transfer
rate – 7000 Samples/Sec at 2 MHz span Auto RBW
Spectrum data.
Ethernet Transfer Rate Mbyte/Sec
(256 Mbyte .IQT file transfer).
RF Center Frequency Switching Time – <10 ms
for 10 MHz frequency change; <500 ms for 3 GHz
frequency change.
Traces, Displays, Detectors
Traces – 2 traces, Spectrum Analyzer Mode.
Displays – Up to 3 time-correlated, user-selected
displays from the following: Spectrum, Spectrogram,
Amplitude vs. Time, Frequency vs. Time, Phase vs.
Time, IQ vs. time; RSA3303A Opt. 21 and
RSA3308A Opt. 21 add: Constellation, EVM vs. time,
Symbol Table, Eye Diagram.
Detector – RMS.
Trace Types Normal (RMS), Average, Max Hold,
Min Hold.
Display Detection – Max, Min, Max/Min.
Inputs and Outputs
Front Panel
Input – 50 , type N.
Preamp Power – Standard RSA3303A and
RSA3308A, Opt. 2A, RSA2203A and RSA2208A:
LEMO 6 pin connector – Pin 1, NC; Pin 2, ID1;
Pin 3, ID2; Pin 4, –12V; Pin 5, GND; Pin 6, +12V.
Rear Panel
10 MHz REF OUT – 50 , BNC, >-3 dBm.
10 MHz REF IN – 50 , BNC, -10 dBm - +6 dBm.
–I, +I, –Q, +Q inputs – RSA3303A with Opt. 03,
and RSA3308A with Opt. 03.
EXT TRIG IN Ext Trig. BNC, High: 1.6 to 5.0 V,
Low: 0 to 0.5 V .
GPIB Interface – IEEE 488.2
TRIGGER OUT – 50 , BNC, High >2.0 V, Low: <
0.4 V (output current 1 mA).
Side Panel
LAN Interface (Ethernet) – 10/100 Base-T (std.).
Serial Interface – USB 1.1, 2 ports.
VGA Output – VGA compatible, 15 pin DSUB.
Automated Measurements
Automated Measurements –
Channel Power, ACPR, Carrier to Noise, Occupied
BW, Carrier Frequency, Emission BW, Spurious
Search, CCDF, dB/Hz Mkr, dBc/Hz Mkr.
Memory Depth (Time) – RSA3303A and RSA3308A
Span Sample Rate Record Length Record Length Spectrum
Opt. 02 Frame Time
20MHz (Baseband) 25.6 Msps 0.64 s 2.56 s 40 µs
15 MHz 25.6 Msps 0.64 s 2.56 s 40 µs
10 MHz 12.8 Msps 1.28 s 5.12 s 80 µs
5 MHz 6.4 Msps 2.56 s 10.24 s 160 µs
2 MHz 3.2 Msps 5.12 s 20.48 s 320 µs
1 MHz 1.6 Msps 10.24 s 40.96 s 640 µs
500 kHz 800 ksps 20.48 s 81.92 s 1.280 ms
200 kHz 320 ksps 51.20 s 200.48 s 3.2 ms
100 kHz 160 ksps 102.40 s 409.60 s 6.4 ms
50 kHz 80 ksps 204.80 s 819.20 s 12.8 ms
20 kHz 32 ksps 512 s 2048 s 32 ms
10 kHz 16 ksps 1024 s 4096 s 64 ms
5 kHz 8 ksps 2048 s 8192 s 128 ms
2 kHz 3.2 ksps 5120 s 20480 s 320 ms
1 kHz 1.6 ksps 10240 s 40960 s 640 ms
500 Hz 800 sps 20480 s 81920 s 1.28 s
200 Hz 320 sps 51200 s 204800 s 2.56 s
100 Hz 160 sps 102400 s 409600 s 5.12 s
Zobrazit stránku 5
1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře

Avanquest Acronis True Image Echo Workstation manuales

Manuales del propietario y guías del usuario para Software De Recuperación De Copia De Seguridad Avanquest Acronis True Image Echo Workstation.
Ofrecemos 1 manuales en pdf Avanquest Acronis True Image Echo Workstation para descargar gratis por tipos de documentos: Guía de usuario


Tabla de contenidos

True Image Echo

1

Workstation

1

Table of Contents

3

Chapter 1. Introduction

7

1.5 License policy

11

1.6 Technical support

12

2.1 System requirements

13

2.2 Security parameters

14

2.2.1 Credentials

18

4.4.1 Group status display

18

3.5 Acronis Backup

18

3.4.1 How it works

26

3.4.2 How to use

26

3.5 Acronis Backup Server

27

3.6 Acronis Active Restore

29

3.6.3 How to use

30

6.3.14 Additional settings

34

Management Console

38

Chapter 6. Creating

47

Chapter 8. Scheduling tasks

47

8.2 Managing scheduled tasks

48

4.5 Managing backup server

49

4.5.1 Default settings

50

4.5.6 Managing Archives

56

Workstation (local version)

59

12.5 Managing System Restore

63

6.3.2 Source

65

3.2 Full, incremental and

65

1.4.2 Supported storage

66

6.3 Setting backup options

67

6.3.6 Backup performance

68

6.3.1 Archive protection

71

6.3.3 Pre/post commands

72

6.3.4 Database support

72

6.3.5 Compression level

73

6.3.8 Archive splitting

74

6.3.10 Media components

75

6.3.11 Error handling

76

6.3.13 Wake On LAN

77

3.4 Acronis Startup

80

Recovery Manager)

80

7.4 Setting

83

7.3.2 Archive selection

85

7.3.13

86

3.6 Acronis

86

Active Restore

86

3.7 Acronis

87

Universal Restore

87

7.4 Setting restore options

91

7.4.3 Pre/post commands

92

7.4.4 Restoration priority

93

7.4.7 Additional settings

94

7.4.8 Error handling

94

3.3 Acronis Secure Zone

105

11.2.1 Exploring an archive

113

11.2.2 Mounting an image

114

11.3 Consolidating backups

116

12.2 WinPopup notification

120

12.1 Email notification

120

12.3 Viewing logs

121

12.4 Event tracing

122

12.4.2 SNMP notifications

123

Chapter 7. Restoring

126

13.3.4 Converting workloads

127

14.1 General information

129

14.2 Security

130

14.3 Executing transfers

130

14.3.6 Old disk data

132

14.3.11 Cloning summary

136

15.1 Selecting a hard disk

138

15.3 Disk add summary

139

Access to archives

143

Backup options

144

General options

144

/partition:DYN1

146

/partition:[partition

150

/harddisk:[disk number]

150

/target_harddisk:[disk

150

*.txt file

154

16.2 Scripting

155





Más productos y manuales para Software De Recuperación De Copia De Seguridad Avanquest

Modelos Tipo de documento
Ninguno